	About us Policies Links FAQ Calculator

Accessories

Pumps

Powerheads

Chemicals

Deionization

Filters

Specialty Filters

Media Reactor

Skimmer CO2 Filter

Fittings

Housings & Brackets

Meters & Controllers

RO Membranes

RO Systems

RO/DI Systems

Storage Tanks

Tubing

Refractometers


	BFS-438 Peristaltic Dosing Pump - $89.90 ON SALE NOW - INTRODUCTORY PRICE ONLY! Perfect for “2-part” alkalinity/calcium (and magnesium!) supplements, this dosing pump delivers a slow, consistent flow of approximately 1.5 ml/minute (about 1 drop every 3 seconds) for delivery of water quality amendments (e.g., calcium, magnesium, alkalinity, chlorine). The pump is powered by 110 vAC current, so you can plug it directly into a wall outlet, or into an appliance timer. Four-roller, silent pump will not back siphon. Control the amount of chemical dosed by the length of time the pump is powered per day. Includes 10 feet of tubing and a graduated cylinder for purposes of measuring the dose supplied by the pump. 1 year warranty on pump (excludes tubing).


	BFS-440 Replacement Tube for Peristaltic Dosing Pump - $9.89 Quick and easy to install - replaces original tube supplied in Buckeye's Peristaltic Dosing Pump.


	BFS-428 Deluxe Booster Pump Kit - $150.29 This kit includes an Aquatec 8800 booster pump, pressure switch, and strainer (all with 1/4 inch fittings), and a transformer. Aquatec recommends a strainer to protect the pump from sediment in the feedwater. A 12 percent savings compared to buying the components separately!


	BFS-427 Booster Booster Pump Kit - $139.99 This kit includes an Aquatec 8800 booster pump, and pressure switch (each with 1/4 inch fittings), and a transformer. A 12 percent savings compared to buying the components separately!


	BFS-309 Aquatec 8800 booster pump, 1/4 inch - $118.00 ON SALE NOW! This high flow pump is the most durable booster pump on the market. Designed for 50 gpd to 100 gpd systems. Adjustable pressure output. Improves membrane rejection rate. 1/4-inch quick connect fittings. Made in the USA. Requires transformer. For maximum pump life, place pump after a sediment filter or strainer (see above).


	BFS-179 Aquatec 8800 booster pump, 3/8 inch - $118.00 This high flow pump is the most durable booster pump on the market. Designed for 50 gpd to 100 gpd systems. Adjustable pressure output. Improves membrane rejection rate. 3/8-inch quick connect fittings. Made in the USA. Requires transformer. For maximum pump life, place pump after a sediment filter or strainer (see above).


	BFS-327 Aquatec 5800 delivery pump, 3/8 inch - $109.00 This pumps is designed for intermittent duty, but can be run continuously for hours at a time. The pump is commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required. The pump can be controlled by either a pressure switch (“demand” mode) or an external power control device (“delivery” mode). Comes with 3/8" quick connect fittings, and built in pressure switch. Comes with 5 ft. cord and plug for standard 120 V AC. Steel mounting plate with four rubber feet is included at no extra cost.


	BFS-310 Pump Wrench - $1.79 This wrench is used to adjust the pressure output of the Aquatec 8800 booster pump.


	BFS-542 Aquatec Rubber Pump Foot - $1.49 Replacement rubber foot for steel Aquatec booster pump bracket.


	BFS-298 Strainer, 1/4 inch - $11.98 Aquatec recomends use of a filter ahead of booster pumps. This strainer has two 1/4 inch quick connect fittings. Internal strainer can be removed, cleaned, and replaced.


	BFS-334 Strainer, 3/8 inch - $12.98 Aquatec recomends use of a filter ahead of booster pumps. This strainer has two 3/8 inch quick connect fittings. Internal strainer can be removed, cleaned, and replaced.


	BFS-254 Aquatec permeate pump - $58.79 This revolutionary pump is powered only by the hydraulic energy of waste water usually lost to the drain (i.e., no electricity required), the pump forces product water into the pressurized storage tank. These pumps dramatically improve the efficiency of R.O. water production, reducing wastewater by up to 80. Benefits include higher delivery pressures, faster water production, superior water quality, and extended filter/membrane life. This pump can be ordered as a component of a new BFS RO system, or can be retrofitted to upgrade existing RO systems. Has 1/4 inch quick connect fittings. Includes clip kit for mounting pump to RO membrane housing.


	BFS-180 Transformer for Aquatec 8800 - $24.99 Power supply for Aquatec 8800 high flow pump.


	BFS-540 Wiring Harness - $4.79 Use this split pigtail to add devices to your booster pump wiring.


	BFS-215 Pressure switch 1/4 inch - $15.79 This pressure switch includes 1/4 inch quick connect fittings and automatically turns the booster pump on when pressure in the system is low, and turns the pump off when pressure is high (for example when the pressure tank is full).


	BFS-415 Shut Off Solenoid Valve - $21.79 Use this valve to control water flow to your water purification system. Designed to close (stop flow) when the Aquatec booster pump is shut down by a pressure switch or other means. Includes 16 inch lead wires with Aquatec-compatable plugs, and quick connect fittings (not shown) for standard 1/4-inch tubing. Wetted surfaces are polypropylene. 24vAC.