About us
Policies
Links
FAQ
Calculator
Accessories
Pumps
Powerheads
Chemicals
Deionization
Filters
Specialty Filters
Media Reactor
Skimmer CO2 Filter
Fittings
Housings & Brackets
Meters & Controllers
Handheld Meters
In-line Meters
Controllers
Accessories
RO Membranes
RO Systems
RO/DI Systems
Storage Tanks
Tubing
Refractometers
BFS-250
COM-100 TDS/EC Meter - $59.95
COM-100
Measures TDS, conductivity, and temperature. Automatic Temperature Compensation. Waterproof housing. Measurement Range: 0-9990 µS; 0-8560 ppm (auto-ranging). Digital calibration (push button). Auto-off function, data-hold function and low-battery indicator. Large easy-to-read LCD screen includes. Factory Calibrated with 1413 µS solution. Includes cap, batteries, lanyard. EC Range: 0 - 9990 µS TDS Range: 0-8560 ppm (mg/L) Temperature Range: 0-80 °C; 32-176 °F Resolution: 0-99: 0.1 µS/ppm; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F Accuracy: /- 2 EC to TDS Conversion Factor
BFS-75
TDS3 handheld meter - $22.20
Check the function of your RO membrane and DI resin with this handy TDS3 (total dissolved solids) meter. Includes batteries. Comes precalibrated. Hold Function saves measurements for convenient reading and recording. Auto-off function. Measurement Range: 0-9990 ppm. From 0-999 ppm, in increments of 1 ppm; from 1000 to 9990 ppm, in increments of 10ppm. Built-in digital thermometer. Factory calibrated with 342 ppm NaCl solution; recalibrate with mini-screwdriver. Automatic temperature compensation. 3-yr manufacturer's warranty.
BFS-420
TDS-EZ - $15.59
Includes Hold and Auto-Off functions. Measurement Range is 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1 ppm, from 1000 to 9990 ppm, the resolution is in increments of 10 ppm. Large and easy-to-read LCD screen. Factory Calibrated with a 342 ppm NaCl solution - can be recalibrated with a mini-screwdriver. Accuracy is /- 3 percent. Uses two 1.5V button cell batteries (included), which last for apx. 1000 hours of use. Best used with room temperature fluids. Measures 6.1 x 1.25 x 1 inches.
BFS-251
PH-200 pH Meter - $79.95
PH-200 pH meter
measures pH and temperature. Includes 4 pH buffer solution in a sponge embedded in a clear cap. Waterproof housing. Measurement range 0-14 pH. Digital calibration (push button). Auto-off, data-hold function and low-battery indicator. Large LCD screen. Three-point factory calibrated to 4, 7, and 10 pH. Includes cap, batteries, and lanyard.
BFS-337
Replacement Probe for PH-200 - $36.90
A genuine HM Digital replacement probe for the PH-200 meter.
BFS-278
ORP-200 Meter - $87.95
ORP-200 meter measures Oxidation Reduction Potential (Redox) and temperature. Includes 4 pH buffer solution in a sponge embedded in a clear cap. Waterproof housing. Simultaneous temperature display. Measurement Range: -999 to 1000 mV. Digital calibration. Auto-off function, data-hold function and low-battery indicator. Includes a cap, batteries, and lanyard.
Accessories
Pumps
Powerheads
Chemicals
Deionization
Filters
Specialty Filters
Media Reactor
Skimmer CO2 Filter
Fittings
Housings & Brackets
Meters & Controllers
RO Membranes
RO Systems
RO/DI Systems
Storage Tanks
Tubing
Refractometers
Value Series
Premium Series
Drinking water kit
Residential Series
Auto Shut Off Valves
Faucets
Float Valves
Flow Restrictors
Flush Kits
Pressure Gauges
Other
Add-on DI kits, standard -size
Add-on DI kits, jumbo
Ammonia-Trap Cartridge
Silica-Trap Cartridge
DI resin, color changing
DI resin, non-color changing
Cation Resin
Anion Resin
Filter kits
Sediment
Carbon/GAC
Refillable Cartridges
Supply Fittings
Valves
Tees
Elbows
Straight/Males
Straight/Females
Bulkheads
Nipples
Barb Fittings
Other/Miscellaneous
Handheld Meters
In-line Meters
Controllers
Accessories
Residential Membranes
2.0 to 2.5 Inch Membranes
4 to 6 Inch Membranes
8 Inch Membranes
Peristaltic Dosing Pump
1/4 Inch
3/8 Inch
1/2 Inch
Value Series
Premium Series
Reef/Residential RO/DI System
Chloramine Special
Flouride Removal
pH Boost
Chlorine/Metals/Scale Removal
Well Water Buddy
Nitrate Removal
Scale Prevention